|
|
|
|
|
|
|
|
|
|
|
|
|
  Category : AiCaP (5) | | Question : AiCaP 01: - What is AiCaP? (1) | | Question : AiCaP 02 - How does AiCaP work? (1) | | Question : AiCaP 03 - What is the advantage with the AiCaP protocol? (1) | | Question : AiCaP 04 - Which language does AiCaP use to present data? (1) | | Question : AiCaP 05 - Which sensors are available for the SEAGUARD®? (1) | | Category : Errata Information (2) | | Question : Workaround for user needing to use the armed/delayed startup - versions 1.3.15 and 1.3.28 (1) | | Question : Workaround for user needing to use the armed/delayed startup - versions from 1.3.15 to 1.4.34. (1) | | Category : Measurement Related (13) | | Question : Is it possible to place the Seaguard conductivity cell on a RCM9? (1) | | Question : MR 01 - Will extra protecting rods on the in-line frame affect the instrument and the measurements? (1) | | Question : MR 02 - Will the configuration setting be stored on the SEAGUARD® if I remove the battery? (1) | | Question : MR 03 - How many smart sensors can be mounted on the top-end plate? (1) | | Question : MR 04 - Do I have to physically disconnect sensors mounted on the instrument if they are not needed in a deployment? (1) | | Question : MR 05 - Is it possible to include analog sensors? (1) | | Question : MR 06 - Can I have 4 analog sensors and 2 smart sensors? (1) | | Question : MR 07 - It looks like one of the sensors is not recognised by the data logger (master). Why? (1) | | Question : MR 08 - Which frames exists for the SEAGUARD® instrument? (1) | | Question : MR 09 - Can the frame be implemented in the inline mooring as done with the RCM9/RCM11? (1) | | Question : MR 10 - Which bottom frame can be used? (1) | | Question : MR 11 - Is it possible to use old bottom mooring frames? (1) | | Question : What happens with the memory when it is full with data? Is the oldest data overwritten or will logging be stopped? (1) | | Category : Power Supply, Maintenance and General (7) | | Question : PS 01 - What about warranty? (1) | | Question : PS 02 - How can I upgrade my instrument? (1) | | Question : PS 03 - How likely is it that my storage card gets full under deployment? (1) | | Question : PS 04 - Is it OK to apply anti-marine growth paint or resin film on the surface of the transceiver head and the temperature sensor? (1) | | Question : PS 05 - My instrument will not start when pressing the power switch. Why? (1) | | Question : PS 06 - How often is maintenance necessary? (1) | | Question : PS 07 - How is the compass tested on site? (1) | | Category : SEAGUARD® CTD (2) | | Question : SCTD 01 - What are the standard sensors on the SEAGUARD® CTD? (1) | | Question : SCTD 02 - Is there any differences in the SEAGUARD® CTD and SEAGUARD® RCM configuration from factory? (1) | | Category : SEAGUARD® RCM (9) | | Question : SRCM 01 - What are the standard sensors on the SEAGUARD® RCM? (1) | | Question : SRCM 02 - Which parameters does the ZPulse™ give? (1) | | Question : SRCM 03 - Can the ZPulse™ be used standalone? (1) | | Question : SRCM 04 - What are the depth ratings of the ZPulse™ DCS? (1) | | Question : SRCM 05 - Why is heading important to measure? (1) | | Question : SRCM 06 - Is it possible to deploy the instrument up-side-down? (1) | | Question : SRCM 07 - In the system configuration menu of the Transducer Activation; when is it preferable to not select all of the transducers? (1) | | Question : SRCM 08 - What does Forward Ping is active mean? (1) | | Question : SRCM 09 - Is there any differences on the SEAGUARD® RCM and SEAGUARD® CTD in configuration from factory? (1) | | Category : SEAGUARD® Studio (3) | | Question : SS 01 - Which software may be used to analyse the data stored on the SEAGUARD® instrument? (1) | | Question : SS 02 - Is it possible to import several data sets into SEAGUARD® Studio at the same time? (1) | | Question : SS 03 - What is the advantage of importing several data sets into SEAGUARD® Studio at the same time? (1) | | Category : Settings, Storing and Communication (16) | | Question : SSM 01 - Do I need to connect a PC to the SEAGUARD® to set it up? (1) | | Question : SSM 02 - Does the SEAGUARD® include any configuration assistance? (1) | | Question : SSM 03 - What is the data storage capacity of the SEAGUARD®? (1) | | Question : SSM 04 - Where are .dcs files (configuration files) saved? (1) | | Question : SSM 05 - How are old .dcs files imported to instrument? (1) | | Question : SSM 06 - Is it recommended to save the raw data? (1) | | Question : SSM 07 - Does expected number of days show for the SD cards capacity when all the nodes are scanned through? (1) | | Question : SSM 08 - Can I enable and disable sensors on the SEAGUARD® when I do my configuration? (1) | | Question : SSM 09 - Do you have a program I can run on my computer to configure a SEAGUARD ® without having an instrument available? (1) | | Question : SSM 10 - I would like to make sure that the parameters from SEAGUARD® are exported in a predefined sequence. How can I do that? (1) | | Question : SSM 11 - I would like to have conductivity as my sixth parameter. How can that be done? (1) | | Question : SSM 12 - Is there any indicator of sensor failure in SEAGUARD®, so that I know when a sensor fails? (1) | | Question : SSM 13 - How do I check that the conductivity sensor works correctly on my SEAGUARD®? (1) | | Question : SSM 14 I have a test unit for RCM 9/RCM 11. May I use it on my new ZPulse? (1) | | Question : SSM 15 - Is there any flag or receipt showing that the data were correctly transferred from the sensors (nodes or slaves) to the datalogger (master)? (1) | | Question : SSM 16 - What quality data are available for SEAGUARD® and its sensors? (1) |
|
|
|
|
|
|
|
|
|
|
|